45钢表面激光熔覆铁基合金涂层显微组织与性能  

Microstructure and Performance of Iron-based Alloy Laser Cladding on 45 Steel Surface

作　　者：王义厢[1] 李宝增[1] 宫耀华[1] 程占保[1] 

机构地区：[1]贵州大学材料科学与冶金工程学院,贵州贵阳550003

出　　处：《热加工工艺》2008年第21期131-133,共3页Hot Working Technology

摘　　要：采用激光熔覆技术在45钢表面制备铁基合金涂层,分析了激光熔覆层的微观组织,测试了其显微硬度及摩擦磨损性能。结果表明:激光熔覆区为细小的树枝晶,组织均匀致密,并有硬质点弥散分布,使得表面硬度和耐磨性大幅度提高。Iron-based alloy powder coating was prepared using laser cladding technology on the surface of 45 steel, the microstructure of the laser cladding coating was analyzed and the microhardness, friction and wear properties of the laser cladding layer were tested .The results show that the microstructure of laser cladding zone is exiguous dentrite,the morphology is compact and there are dispersion of hard spots in the laser cladding zone. The hardness and wear-resistance of the surface improve obviously.

关 键 词：激光熔覆 铁基合金涂层 微观组织 显微硬度 耐磨性能 

分 类 号：TG174.44[金属学及工艺—金属表面处理] TG156.99[金属学及工艺—金属学]