反应堆输入线性正反应性时考虑温度反馈的仿真计算  

Simulation Calculation of Response to Linear Positive Reactivity Inserted in Reactor with Temperature Feedback

作　　者：商学利[1] 张帆[1] 陈文振[1] 赵雷[1] 

机构地区：[1]海军工程大学核能科学与工程系,武汉430033

出　　处：《核动力工程》2008年第6期17-20,共4页Nuclear Power Engineering

基　　金：国家自然科学基金资助项目(10575131)

摘　　要：运用点堆中子动力学方程建立模型,计算了某小型反应堆在6种典型工况下,反应堆引入线性正反应性时各主要参数的变化,并将计算结果与该堆的三维实时仿真软件的计算结果进行了比较。结果表明,点堆模型可以模拟出反应堆受到线性正反应性扰动后各主要参数的峰值和扰动后的稳定值,但在响应时间和波动持续时间方面仍需改进。In this paper, the model is founded with point-reactor neutron kinetics equation, and main parameters of a small reactor are calculated under six typical operation conditions, when a linear positive reactivity is inserted. The results are compared with those obtained by 3-D real-time simulation software of reactors. It is shown that point-reactor model can describe the maximum changes and steady values of main parameters in the reactor when a linear positive reactivity is inserted, although improvements are also needed in calculating the response time and duration of the fluctuation.

关 键 词：点堆模型 反应性 温度反馈 实时计算 中子动力学 

分 类 号：TL329.2[核科学技术—核技术及应用]