检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]华南理工大学化学工程研究所
出 处:《制冷学报》1997年第3期6-11,共6页Journal of Refrigeration
基 金:广东省自然科学基金
摘 要:研究了R134a、R142b在光滑管和机械加工表面多孔管水平管外的池沸腾换热性能,分析了工质在水平管外的沸腾传热机理,实验的对比压力P/Pc=0.20。实验结果表明,光滑管外沸腾实验结果与取平均表面粗糙度为2μm的Gorenflo公式预测结果吻合较好,与光滑管相比,机械加工表面多孔管能显著地强化沸腾传热,且随着热流密度的增加,强化倍率减小。通过数据拟合,得到了沸腾换热系数的经验关系式。An experimental investigation on nucleate pool boiling heat transfer of refrigerants outside horizontal plain and E tube has been carried out and the heat transfer mechanism was discussed.The refrigerants are R134a and R142b at normalized saturation pressure P/P c =0 20.For the plain tube,the present data of R134a and R142b are coincided well with Gorenflo correlation for surface roughness 2μm.Compared with plain tube,the machime processed porous tube shows considerable enhancement effect.And the enhancement rate decreases with increasing heat flux.The correlations of boiling heat transfer coefficients are obtained.
分 类 号:TB612[一般工业技术—制冷工程] TB611
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7