嵌入式系统eCOS移植分析及应用  

Transplantation Analysis and Application of Embedded System eCOS

作　　者：邱丽波 邵笑梅 苏慧祎 王守勇 

机构地区：[1]烟台工程职业技术学院,山东烟台264006

出　　处：《现代电子技术》2008年第24期45-48,共4页Modern Electronics Technique

摘　　要：为将嵌入式实时操作系统eCOS在以ARM920T处理器S3C2410为核心的开发板上运行,对eCOS的一般性移植方法进行研究,提出将eCOS向目标板移植的具体方法。在将硬件抽象层HAL针对目标板做了修改和移植后,生成最小配置的redboot镜像,用以在目标板上引导eCOS,在此基础上针对目标板增加eCOS的配置选项和包,结合C代码和eCOS库文件编写eCOS应用程序,结果表明eCOS以及应用程序在目标板可以正常运行。To run embedded real- time operating system on the developing board based on ARM920T processor S3C2410, the general methods of system transplantation are studied. A concrete procedure of transplanting eCOS to target board is presented. After modifying and transplanting HAL for the target board,a redboot image with minimum configuration is built to guide eCOS. Then more configurations and packages are added to the target board as well as an eCOS application program is compiled. The result shows that eCOS and its application program can run normally on the target board.

关 键 词：嵌入式可配置操作系统 ARM920T 系统移植 硬件抽象层 

分 类 号：TP316[自动化与计算机技术—计算机软件与理论]