弱刚度件加工变形分析与控制对策研究  

Study on Machining Deformation and Their Control Approaches of Weak Rigidity Workpieces

作　　者：汪振华[1] 袁军堂[1] 郑雷[2] 黄建安[1] 

机构地区：[1]南京理工大学机械工程学院,江苏南京210094 [2]鲁东大学交通学院,山东烟台264025

出　　处：《制造技术与机床》2008年第12期109-112,共4页Manufacturing Technology & Machine Tool

基　　金：国家部委“十一五”预研项目(62301090103)

摘　　要：针对弱刚度件在机械加工中容易产生变形从而影响其加工精度和加工质量的情况,首先分析了引起弱刚度件加工误差以及加工变形的原因,比较了其与大型结构件加工的区别。其次,采用通用有限元软件ANSYS10.0对具有典型结构的特征弱刚度件加工变形进行了数值模拟,从数值方法上预测分析了其变形规律。最后,根据引起弱刚度构件加工变形的原因以及变形规律,对弱刚度件加工工艺方法以及加工变形控制对策进行了探讨。The machining deformation of the weak rigidity workpiece is easy to appear in machining, thus affects its processing precision and quality. Firstly, this paper discussed on the reasons, which caused the processing error and machining deformation of the weak rigidity workpiece, and compared the machining processes of the weak rigidity workpiece with large -scale structural parts： Secondly, the general finite element software ANSYS10.0 was applied to simulate the machining deformation of the characteristic weak rigidity workpiece. Finally, according to the reason that caused the machining deformation of the weak rigidity workpiece and the deformation rule of the weak rigidity workpiece, this paper has discussed on the machining processes and machining deformation＇s control approaches of the weak rigidity workpiece.

关 键 词：弱刚度 加工变形 变形控制 数值模拟 

分 类 号：TH721.01[机械工程—仪器科学与技术] S562[机械工程—精密仪器及机械]