检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙士云[1] 束洪春[2] 唐岚[1] 廖泽龙[3] 高孟平[3] 杨强[3]
机构地区:[1]哈尔滨工业大学电气工程及自动化学院,黑龙江省哈尔滨市150001 [2]昆明理工大学电力工程学院,云南省昆明市650051 [3]云南电网公司,云南省昆明市650051
出 处:《电网技术》2008年第23期35-39,共5页Power System Technology
基 金:国家自然科学基金资助项目(90610024,50467002,50347026);云南省科技攻关项目(2003GG10);云南省自然科学基金资助项目(2005F0005Z,2004E0020M,2002E0025M);云南省教育厅基金资助项目(07Y40615)~~
摘 要:励磁控制系统的强励功能能够在电力系统发生扰动后的短时间内,提供大量的无功功率,迅速恢复电压水平,提高系统的稳定性。电压调节器参数设置直接影响励磁机的强励效果和系统的暂态稳定性。针对2010年南方电网交直流混合输电系统,研究了励磁控制系统电压调节器的最大输出和调压器增益对电力系统暂态稳定裕度的影响。仿真结果表明,当电压调节器的输出电压为最大值时,系统电压暂态稳定裕度没有达到最大;当系统的功角暂态稳定裕度达到最大时,系统电压安全裕度也没有达到最大。Forced excitation of excitation control system can supply a large amount of reactive power, restore voltage level quickly and enhance power system stability in a short time period after power system is disturbed. The parameter setting of voltage regulator directly impacts the forced excitation effect and transient stability of power system. For hybrid AC/DC power transmission system in South China power grid in the year 2010, the impact of maximum output of voltage regulator in excitation control system and regulator gain on power system transient stability margin is researched. Research results show that when the output of voltage regulator is the maximum value, the voltage transient stability margin of power system does not achieve its maximum; when angle transient stability margin reach maximum gain, it does not make voltage security margin achieving maximum also.
分 类 号:TM761.11[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.225