酸性氧化电位水制备的影响因素  

Effect Factors of the Preparation of Electrolyzed Oxidizing Water

作　　者：曾新平[1] 唐文伟[2] 庄琳懿[2] 倪亚明[2] 

机构地区：[1]同济大学生命科学与技术学院,上海200092 [2]同济大学化学系,上海200092

出　　处：《化学通报》2008年第12期935-939,共5页Chemistry

摘　　要：对酸性氧化电位水的产生条件进行单因素分析的结果表明，在实验研究范围内电解质浓度越高、电压越大、极间距越小、电解时间越长，酸性氧化电位水的水质越好。考虑到制水成本和效率，制备酸性氧化电位水的最佳反应参数为：CNacl=1．5—2．5g／L，U=15—20V，d=20～30mm，t=2～4min。The influence of electrolyte concentration, applied voltage, electrode gap and electrolysis time on electrolyzed oxidizing water （EOW） was discussed. The results of single factor analysis demonstrated that the quality of EOW was improved with the increase of electrolyte concentration, applied voltage and electrolysis time and the decrease of electrode gap. The optimal conditions were determined to be CNacl = 1.5 - 2.5g/L, U = 15 - 20V, d = 20 - 30ram, t = 2 - 4min.

关 键 词：酸性氧化电位水 电解质浓度 电压 极间距 电解时间 

分 类 号：R187[医药卫生—流行病学]