高能超声法制备SiCp／AZ91D纳米复合材料  

Fabrication of Nano-SiC_p/AZ91D Composites by High-intensity Ultrasonic Method

作　　者：贾秀颖[1] 高飞鹏[1] 张琼元[1] 刘世英[1] 李文珍[1] 

机构地区：[1]清华大学机械工程系、先进成形制造教育部重点实验室

出　　处：《特种铸造及有色合金》2008年第12期962-964,共3页Special Casting & Nonferrous Alloys

摘　　要：采用高能超声法制备纳米SiC颗粒增强AZ91D镁基纳米复合材料。高能超声能够使纳米级陶瓷颗粒在镁合金熔体中有效分散,所制备的复合材料抗拉强度和屈服强度等力学性能比基体有所提高。其中所用SiC颗粒粒径在40nm左右,在0.5%的添加量下复合材料可以获得较好的性能,铸态条件下抗拉强度超过200MPa。Nano-SiCp/AZ91D composites were prepared successfully by high intensity ultrasonic method.Tensile strength and yield strength of the prepared composites are superior to those of the matrix alloy as a result of high intensity ultrasonic obviously dispersing nano-ceramic particles in magnesium alloy melts.Tensile strength of the composites makes 200 MPa with 0.5% SiC addition with approximately 40 nm in size,exhibiting a better properties.

关 键 词：高能超声法 镁基纳米复合材料 纳米SiC颗料 

分 类 号：TB383.1[一般工业技术—材料科学与工程]