多孔粒状铵油炸药爆炸后有毒气体含量测定  

Measurement of the Toxic Gases Produced by ANFO

作　　者：高贫[1] 刘大斌[1] 

机构地区：[1]南京理工大学国家民用爆破器材质量监督检验中心,江苏南京210094

出　　处：《爆破器材》2008年第6期8-10,共3页Explosive Materials

摘　　要：文章研究了多孔粒状铵油炸药爆炸后有毒气体含量的测试方法。试验结果表明，采用10g太安药柱作为传爆药柱爆炸取气，再扣除太安本身产生的有毒气体量可以达到较好的测试效果。实际测得的配方为硝酸铵：燃料油=95：5的多孔粒状铵油炸药爆炸后有毒气体含量一般在31-45L／kg范围内。Testing measurement of the toxic gases produced by ANFO was studied in this paper. The experimental results showed that good testing results could be achieved by using the 10g PETN as booster and then deducting the toxic gases produced by PETN. Using this method, the amount of toxic gases produced by ANFO with the chemical composition of AN ： Oil =95 ： 5 was determined to be generally in the range of 31 - 45 L/kg.

关 键 词：多孔粒状铵油炸药 传爆药柱 有毒气体 太安 

分 类 号：TQ560.72[化学工程—炸药化工]