全合成法光纤预制棒制造研究  

Optical Performs Manufacture Using Complete Synthetic Technology

作　　者：张立永 吴兴坤[1,2] 杨军勇 曹松峰 

机构地区：[1]杭州富通通信技术股份有限公司,浙江富阳311422 [2]浙江大学现代光学仪器国家重点实验室,杭州310027

出　　处：《光子学报》2008年第12期2392-2395,共4页Acta Photonica Sinica

基　　金：国家"863"高技术研究与发展计划(2002AA312210);国家科技攻关计划(2004BA309B03)资助

摘　　要：介绍了一种全新的全合成法G.655和G.656光纤制造工艺,详细分析了该工艺中芯层折射率差Δ0、芯层厚度a、第二包层的折射率差Δ2、第二包层的厚度c2等结构参量与光纤光学性能的关系.结果表明,制造该两种光纤时,Δ0应在0.0120～0.0155之间,Δ2应在0.0140～0.0230之间,a应在2.8～3.2μm之间,c2应在满足截止波长的要求下尽可能小.Based on Complete Synthetic Process, a novel preform fabrication process for G. 655 and G. 656 optical fibers with a complicated refractive index profiles were designed and studied. The influences on propagation properties of major waveguide parameters including fiber core refractive index △0, core diameter a, refractive index of the second cladding △2 and thickness of the second cladding c2 were discussed in detail and optimization of design was described. The result demonstrated that △0, △2, and a should be between 0. 0120-01 0155,0.0140-0. 0230 and 2.8-3.2um,respectively,while c2 as smaller as possible on the condition that the cutoff wavelength is not out of range.

关 键 词：折射率剖面 光纤预制棒 G.655光纤 G.656光纤 全合成工艺 

分 类 号：TN818[电子电信—信息与通信工程]