边撑疵产生原因及解决措施  

Cause and Resolving Measure of Temple Defect

作　　者：刘宝石[1] 

机构地区：[1]天津天纺投资控股有限公司

出　　处：《棉纺织技术》2009年第1期55-57,共3页Cotton Textile Technology

摘　　要：分析边撑疵产生的原因及解决措施。边撑疵产生的原因主要有边撑本身的规格和安装尺寸、边撑握持力不均匀、织口左右移动和前后游动、纬纱强力不足等,认为通过认真检修边撑,使用多环、小针的边撑,调整织造工艺稳定织口,控制环境温湿度等措施,可有效消除边撑疵,提高布面质量。Cause and resolving measure of temple defect were analysed. The main reasons were temple specification and installing size, unevenness of temple gripping force, cloth-fell moving and lack of weft strength et al. It is considered that temple defect could be eliminated and quality of fabric surface could be improved after using loopy little needle temple, adjusting weaving processing to stable cloth-fell, controlling environmental temperature and humidity et al.

关 键 词：喷气织机 边撑疵 边撑形式 织口控制 纬纱强力 

分 类 号：TS105[轻工技术与工程—纺织工程]