检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋洪庆[1] 朱维耀[1] 孙玉凯 李正科 成进湖 王明[1]
机构地区:[1]北京科技大学土木与环境工程学院,北京100083 [2]中国石油吐哈油田分公司石油勘探开发研究院
出 处:《辽宁工程技术大学学报(自然科学版)》2008年第6期809-812,共4页Journal of Liaoning Technical University (Natural Science)
基 金:国家自然科学基金资助项目(10772023);国家重点基础研究发展计划基金资助(2007CB209500)
摘 要:为了解决高注低采改善平面非均质油藏注水开发理论问题,采用岩心组合模型水驱油实验。研究了4种平面非均质模型方案在不同注采方式下水驱油机理,建立了反映平面非均质油层渗流特征的渗流数学模型,利用积分变换推导出模型的解析解。实验特征和模型计算结果表明:高注低采的开发过程中储层全程泄压效果也远好于低注高采的开发情况。解决了高注低采开发的基本理论问题,为矿场应用提供理论依据。Water-flooding combined core experiment was performed to study the mechanism under different injection-production ways for four kinds of non-homogeneous plane model programs. The flow mathematic model was established to reveal the characteristics of plane heterogeneous oil reservoir. Analytical solutions are obtained by integral transformation derived model. The analysis of the model demonstrates that the whole reservoir pressure relief effect during high-permeability location injection and low production is much better than those during low-permeability location injection and high production, which can solve the quantitative problems and provide theoretical basis for the development of high injection and low production.
关 键 词:平面非均质油藏 高注低采 压力分布 压力梯度分布 渗流数学模型
分 类 号:TE122[石油与天然气工程—油气勘探]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222