基于有限元模拟的空拔铜管拉拔参数的优化  

Optimization of drawing parameters for copper tubes with hollow sinking based on FEM simulation

作　　者：杨晓静[1] 孙方宏[1] 张志明[2] 沈荷生[2] 郭松寿 

机构地区：[1]上海交通大学机械与动力工程学院,上海200240 [2]上海交通大学微纳米科学研究院,上海200240 [3]上海交友钻石涂层有限公司,上海200240

出　　处：《中国有色金属学报》2008年第12期2245-2252,共8页The Chinese Journal of Nonferrous Metals

基　　金：国家自然科学基金资助项目(50575135);教育部新世纪优秀人才计划资助项目(NCET-06-0399)

摘　　要：为研究拉拔参数对铜管空拔变形的影响,运用非线性有限元分析软件对铜管空拔过程进行仿真,分析空拔过程中铜管与模具的轴向及径向应力分布规律,并以此阐述空拔铜管的缩径缺陷。利用正交实验法模拟研究拉拔参数(工作锥半角α、过渡圆弧半径R、定径带长度L、摩擦因数μ、拉拔速度v)对铜管空拔的影响,并采用极差分析和方差分析对模拟结果进行分析,得到铜管一定减面率条件下的最佳拉拔参数(α=9°,R=5mm,L=2mm,μ=0.05,v=100m/min)及各因素对分析指标的影响。在此基础上对优化方案进行数值模拟,模拟结果表明了正交实验对铜管空拔参数优化的有效性。这对实际中提高铜管空拔质量,延长模具寿命有重要的指导意义。In order to investigate the influence of drawing parameters on the deformation of copper tubes in hollow sinking, the nonlinear finite element software was used to simulate the whole copper tube hollow sinking process. The distributions of the axial stress and radial stress were analyzed, and the mechanism of drawn copper tubes diameter shrinking was explained. The influences of drawing parameters （the semi-angle of drawing dies a, the transition arc radius R, the length of bearing part L, the friction coefficientμ, the drawing velocity v） on copper tubes hollow sinking were investigated by using orthogonal experiment. The optimal drawing parameters （a=9°, R=5 mm, L=2 mm, μ=0.05, v= 100 m/min） under certain reduction of area and the influence of factors on analysis indexes were obtained according to the simulation results by range analysis and variance analysis. Furthermore, the optimal drawing parameters were simulated by FEM, and the simulation results confirmed the effectiveness of the orthogonal experiment in optimizing tubes drawing in hollow sinking. It is of great significant for improving the quality of drawn copper tubes and prolonging the lifetime of drawing dies.

关 键 词：空拔 铜管 拉拔参数 有限元 正交实验法 

分 类 号：TG356.5[金属学及工艺—金属压力加工]