金属波纹填料在废油处理中应用的研究  

Metal Corrugated Packing in Waste Oil Treatment

作　　者：张贤明[1] 徐君[1] 李川[1] 韩敏[1] 贾玉梅[1] 

机构地区：[1]重庆工商大学工业废油资源化技术与装备教育部工程研究中心,重庆400067

出　　处：《环境科学与技术》2009年第2期159-163,共5页Environmental Science & Technology

基　　金：重庆市自然科学基金项目(CSCT;2006BB2251;CSCT;2006BB0154)

摘　　要：文章主要对其结构特征进行剖析,并对波纹板在油液处理过程中的作用原理进行分析。通过两种油水分离材料进行真空脱水试验,真空脱水第一次循环中,金属波纹板的脱水率为79.12%,较传统折叠丝网脱水率高21%,证明金属波纹填料对废油真空脱水有良好的效果。最后通过两种不同规格的金属波纹板填料进行真空脱水试验,证明比表面积较大的350Y波纹板填料在废油脱水中并不优于比表面积较小的250Y金属波纹板填料。Characteristics of metal corrugated packing structure were analyzed. The basic principle of metal corrugated packing is studied in oil treatment. Two oil-water separation material were compared, in the first cycle, dehydration rate of metal corrugated packing was 79.12%, 21% higher than traditional folding net. It is effective to wipe off minute water from waste oil by metal corrugated packing in the experiment. Compared 250Y metal corrugated packing with 350Y metal corrugated packing, single factor experiment is applied to measure the water oil of evaporation efficiency. It is indicated that evaporation efficiency of 350Y metal corrugated packing is not higher than 250Y metal corrugated packing.

关 键 词：金属波纹填料 规整填料 石油化工 油液处理 

分 类 号：TQ028.38[化学工程] X74[环境科学与工程—环境工程]