叶梁热压面温度均匀性分析及仿真模拟  

Analysis and simulation on temperature uniformity of blade thermo-compression surface

作　　者：岳鹏[1] 高殿斌[1] 范国成[1] 杨涛[1] 

机构地区：[1]天津工业大学机械电子学院,天津300160

出　　处：《机械设计与制造》2009年第1期15-17,共3页Machinery Design & Manufacture

摘　　要：利用有限元软件ANSYS模拟仿真叶梁热压成型过程中热压面温度变化,分析热压面温度不均匀的原因。通过实验得到的预测性数据,为叶梁热压设备加热机构的分布改进提供了一些必要的参考数据和设计依据。实验得到的叶梁成型温度均匀一致,总体误差在±0.5℃,最高温度和最低温度之差小于0.2%。Finite element software ANSYS was used for simulating the temperature change in the process of blade hot-pressing. It analyzed the reason of temperature uniformity on the thermo-compression surface. According to the predictability data from the experiments ,some necessary reference database and design bases were provided far improving the distribution of heating institutions-blade hot-pressing equipment. Temperature of blade molding was uniformity. The global error of temperature is in ±0.5℃. The difference between the highest and lowest temperature was less than 0.2%.

关 键 词：热压面 温度 仿真模拟 叶梁 

分 类 号：TH16[机械工程—机械制造及自动化] TM743[电气工程—电力系统及自动化]