某型航空发动机导流叶片调节器建模仿真  

Simulation of Aeroengine Hydro-mechanical Inlet Guide Vanes Regulator

作　　者：李阔[1] 郭迎清[1] 祁新杰[1] 

机构地区：[1]西北工业大学动力与能源学院,陕西西安710072

出　　处：《机床与液压》2009年第1期145-147,共3页Machine Tool & Hydraulics

摘　　要：根据AMESim与MATLAB/Simulink各自的特点,采用了AMESim和MATLAB/Simulink联合仿真的方法对某型航空发动机机械液压式导流叶片调节器进行了建模和仿真,验证了控制器的控制规律,并且分析了一些重要参数对系统性能的影响。结果表明,应用AMESim和MATLAB/Simulink联合仿真的方法,对某型航空发动机导流叶片调节器的建模具有很高的精确度,能够很好地反映实际系统的控制规律,可指导该型导流叶片控制器的调试以及改进改型方面的设计。Based on the characteristic of AMESim and Matlab/simulink, simulation of a hydro-mechanical aeroengine inlet guide vanes regulator was achieved by the collaborative simulation. The control law of the system was validated, and the influence of the important parameters to the system performance were analyzed. The inlet guide vanes regulator model established in AMESim and Matlab/simulink reflects the characteristics of actual system, and the model results closely match the experimental ones, so it＇s useful to debug and improve the inlet guide vanes regulator.

关 键 词：导流叶片调节器 建模 仿真 机械液压 

分 类 号：V231.3[航空宇航科学与技术—航空宇航推进理论与工程]