基于数值模拟的注塑模具优化及注塑成型工艺参数快速设置  

Optimization of Injection Mould and Rapid Setting of Processing Parameters of Injection Moluding Based on Numerical Simulation

作　　者：刘兆栋[1] 苏文斌[1] 姚海剑[2] 

机构地区：[1]西安交通大学机械工程学院,陕西西安710049 [2]河南新飞电器有限公司,河南新乡453002

出　　处：《塑料科技》2009年第1期68-71,共4页Plastics Science and Technology

摘　　要：以某一监控设备外壳成型为例,介绍了利用Moldflow软件优化模具结构及快速设置注塑成型工艺参数的方法,为注塑模具设计和试模时工艺参数的设定提供了依据,缩短了模具设计和试模周期。Taking the moulding of a monitoring device shell as an example, the methods to optimize the injection mould structure and set the processing parameters of injection moulding by Moldflow software were introduced, which provided theoretical basis for the design of injection moud and setting of the processing parameters for mould testing, and shortened the cycle for mould design and testing.

关 键 词：注塑成型 工艺参数 数值模拟 MOLDFLOW 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]