三官能度过氧化物引发制备HIPS树脂 Ⅰ.预聚合动力学  

Preparation of high-impact polystyrene in the presence of tri-functional peroxide initiator Ⅰ.Studies on pre-polymerization kinetics

作　　者：王淑敏[1] 李杨[1] 张春庆[1] 杜晓旭[1] 常丽[1] 王玉荣[1] 

机构地区：[1]大连理工大学化工学院高分子材料系精细化工国家重点实验室,辽宁大连116012

出　　处：《合成树脂及塑料》2009年第1期6-9,共4页China Synthetic Resin and Plastics

基　　金：国家自然科学基金项目(20774015)

摘　　要：以多官能度过氧化物3,6,9-三甲基-3,6,9-三乙基-1,4,7-三过氧烷为引发剂,采用本体聚合法制备高抗冲聚苯乙烯,考察了各反应条件对预聚合动力学的影响。结果发现:聚合温度由125℃逐渐升高到145℃和引发剂质量分数由0.0075%增加到0.0200%时,聚合速率逐渐加快;当引发剂质量分数高于0.0200%时,聚合速率变化不大;随着基础胶质量分数由5%增加到15%和乙苯质量分数从10%增加到30%,聚合速率逐渐降低。不同引发剂引发聚合的效果与其官能度、半衰期及聚合温度等因素有关。Bulk polymerization of high-impact polystyrene （HIPS） was carried out in the presence of a tri-functional peroxide initiator： 3,6,9-triethyl-3,6,9-trimethyl-l,4,7-triperoxonane （TETMTPA）. The effects of different polymerization conditions on the pre-polymerization kinetics were studied and discussed in detail in this paper. It is found that, the polymerization rate increases as the polymerization temperature rises the initiator dosages increases from 0.007 5% to 0.020 0%, the polymerization initiator dosages is more than 0.020 0%, the polymerization rate changes little. from 5% to 15%, the polymerization rate decreases. Also, when the amount from 125 ℃ to 145℃. When rate increases too, but when the As the rubber dosages increases of ethyl benzene increases from 10% to 30%, the polymerization rate gets lower. The effects of the initiators on the polymerization depended on the initiators＇ functionality, half-life, and polymerization temperature.

关 键 词：高抗冲聚苯乙烯 多官能度引发剂 本体聚合 预聚合动力学 

分 类 号：TQ325.2[化学工程—合成树脂塑料工业]