纯钛的高频感应钎焊  

High-Frequency Induction Brazing of Titanium

作　　者：杨永福[1] 闫安军 雷艳 

机构地区：[1]西北有色金属研究院

出　　处：《稀有金属材料与工程》1998年第2期103-106,共4页Rare Metal Materials and Engineering

摘　　要：研究了银基钎料（ＦＡ００１Ａｇ，ＦＡ００２ＡｇＣｕ，ＦＡ００５ＡｇＡｌ等）和钛基钎料（ＦＴ１００ＴｉＣｕＮｉ，ＦＴ１０２ＴｉＣｒＮｉ，ＦＴ１０３ＴｉＺｒＣｕ等）对纯钛高频感应钎焊接头强度的影响。研究表明，新研制的钛基ＦＴ１００ＴｉＣｕＮｉ钎料的钎焊性能优于传统的银基钎料，其钎焊接头剪切强度高于其它类型的钎料。试验得出了每种钎料钎焊接头剪切强度与保温时间的关系。The effects of silver base brazing filler metals (FA001Ag, FA002AgCu, FA005AgAl, etc.) and titanium base brazing filler metals (FT100TiCuNi, FT102TiCrNi, FT103TiZrCu, etc.) on the strength of high-frequency induction brazed joints in titanium are studied. The investigations show that a recently developed brazing alloy, FT100TiCuNi, is suitable for industrial use. The shear strength of a joint with FT100TiCuNi filler metal is higher than that of a joint with other brazing alloys. In this investigation, the relation ship of the shear strength of each brazed joint to holding time is discussed in detail.

关 键 词：钛 钎焊 钎料 感应钎焊 

分 类 号：TG457.19[金属学及工艺—焊接] TG454