电刷镀 Ni-P(Ce)及 Ni-Cu-P(Ce)镀层的冲击磨损行为  

Impact wear phenomena in Ni P(Ce) And Ni Cu P(Ce) Coatings

作　　者：黄锦滨[1,2] 李学敏[1,2] 丁连珍 朱宝亮[1,2] 刘家浚 

机构地区：[1]清华大学摩擦学研究所 [2]甘肃工业大学机械系

出　　处：《清华大学学报（自然科学版）》1998年第2期25-27,43,共4页Journal of Tsinghua University(Science and Technology)

基　　金：国家教委博士点基金

摘　　要：本文利用冲击磨损实验机，扫描电镜，Ｘ射线衍射仪等仪器观察与分析了Ｎｉ－Ｐ（Ｃｅ）及Ｎｉ－Ｃｕ－Ｐ（Ｃｅ）镀层在冲击磨损过程中的磨损现象。其中Ｎｉ－Ｐ镀层的冲击磨损过程主要表现为镀层的加工硬化、片状剥落与粘着磨损。加入稀土Ｃｅ后，增加了镀层的硬度、改变了其结构，减缓了镀层加工硬化程度，并推迟了粘着磨损的发生。而Ｎｉ－Ｃｕ－Ｐ镀层的冲击磨损除了塑性变形，疲劳片状剥落外，与Ｎｉ－Ｐ（Ｃｅ）镀层不同的是还有点蚀剥落。加入稀土Ｃｅ后，改善了镀层的结构，明显提高了镀层的抗冲击磨损性能，但没有改变镀层的冲击磨损机制。实验表明，Ｎｉ－Ｃｕ－Ｐ（Ｃｅ）镀层抗冲击磨损性能远远高于Ｎｉ－Ｐ（Ｃｅ）镀层。The behavior of the impact wear of Ni P(Ce) and Ni Cu P(Ce) coatings prepared by brush plating was investigated by impact wear test machine, scanning electron microscopy, X ray diffraction. The results showed that the main forms of impact wear were plastic deformation, work hardening, fatique delamination and adhesion wear. After cerium was added, the hardness of the coating was increased and the structure of the coating was changed. Furthermore the work hardening of Ni P coating was lightened and adhesion wear was delayed and the structure and impact wear resistance of Ni Cu P coating was improved when cerium was added, whereas the mechanism of the impact wear was not changed.

关 键 词：冲击磨损 电刷镀 镀镍 镀层 

分 类 号：TQ153.12[化学工程—电化学工业]