A fully integrated BPSK amplitude and spectrum tunable transmitter for IR-UWB system  

作　　者：夏玲琍 黄煜梅 洪志良 

机构地区：[1]State Key Laboratory of ASIC & System, Fudan University

出　　处：《Journal of Semiconductors》2009年第1期65-69,共5页半导体学报（英文版）

摘　　要：A 3-5 GHz low power BPSK modulated impulse radio UWB transmitter is implemented in 0.13μm CMOS technology. In this design the amplitude and spectrum of the output impulse are both tunable to solve the special problem in IR-UWB, where it is difficult to control the spectrum. Measurement results indicate that, by changing the control bits in the gain control circuit and differential circuit, the 3-step peak-to-peak voltage amplitudes are 240, 170 and 115 mV and the center frequency of the impulse can be tuned from 3.2 to 4.1 GHz. A power controlled output buffer is designed to drive the antenna. The total power consumption is only 4.44 mW when transmitting a baseband signal of 100 MHz. The chip area is 1.2 × 1.4 mm^2.A 3-5 GHz low power BPSK modulated impulse radio UWB transmitter is implemented in 0.13μm CMOS technology. In this design the amplitude and spectrum of the output impulse are both tunable to solve the special problem in IR-UWB, where it is difficult to control the spectrum. Measurement results indicate that, by changing the control bits in the gain control circuit and differential circuit, the 3-step peak-to-peak voltage amplitudes are 240, 170 and 115 mV and the center frequency of the impulse can be tuned from 3.2 to 4.1 GHz. A power controlled output buffer is designed to drive the antenna. The total power consumption is only 4.44 mW when transmitting a baseband signal of 100 MHz. The chip area is 1.2 × 1.4 mm^2.

关 键 词：IR-UWB pulse generator BPSK 

分 类 号：TN832[电子电信—信息与通信工程]