FeAl多孔材料与不锈钢的焊接  

Welding of FeAl porous material and stainless steel

作　　者：高海燕[1] 贺跃辉[1] 沈培智[1] 江垚[1] 黄伯云[1] 徐南平[2] 

机构地区：[1]中南大学粉末冶金国家重点实验室,长沙410083 [2]南京工业大学膜科学技术研究所,南京210009

出　　处：《中国有色金属学报》2009年第1期90-95,共6页The Chinese Journal of Nonferrous Metals

基　　金：国家自然科学基金重点资助项目(20636020);国家杰出青年基金资助项目(50825102);湖南省自然科学基金资助项目(05jj30097)

摘　　要：采用真空钎焊工艺,以Cu-Sn混合粉末压坯为钎料,研究FeAl多孔材料与不锈钢的焊接性能。结果表明:钎料成分和焊接工艺参数对FeAl多孔材料和434L不锈钢的焊接性能影响显著,焊接过程中成分为Cu-25%Sn(质量分数)的粉末压坯钎料在焊缝处生成Cu81Sn22和Cu10Sn3两种金属间化合物,成分为Cu-10%Sn的粉末压坯钎料在焊缝处生成(Cu,Sn)固溶体;采用Cu-10%Sn粉末压坯为钎料,真空下经过940℃保温15min,FeAl多孔材料与不锈钢通过(Cu,Sn)连接可获得良好的焊接接头,得到的FeAl多孔材料与不锈钢焊接后的抗拉强度为83.9MPa,可达到FeAl多孔材料母体抗拉强度的90.6%;FeAl多孔材料与不锈钢的真空钎焊机理为液态钎料对被焊母体的粘结连接及钎料元素与被焊母体元素间的互扩散和反应。FeAl porous material and stainless steel were welded by vacuum brazing using Cu-Sn green compact as brazing filler. The weldability of FeAl porous material with stainless steel was investigated. The results show that the composition and parameters of vacuum brazing have great effect on the tensile strength of welded FeAl porous material and stainless steel. Cu81Sn22 and Cu10Sn3 intermetallics are formed in the brazing line when the filler composition is Cu-25%Sn. （Cu, Sn） solid solution is formed in the brazing line when the filler composition is Cu-10%Sn. After brazing at 940℃ for 15 min using Cu-10%Sn as brazing filler, the brazed FeAl porous material and stainless steel obtain the best tensile strength of 83.9 MPa, that is 90.6% of the tensile strength of FeAl porous material. The brazing mechanisms are the matrix materials joined by liquid brazing filler and the interdiffusion and reaction between the elements in filler and matrix materials.

关 键 词：FeAl:多孔材料 真空钎焊 焊接性能 

分 类 号：TG146[一般工业技术—材料科学与工程]