检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:龙江启[1] 兰凤崇[1] 陈吉清[1] 石柏军[1]
机构地区:[1]华南理工大学机械与汽车工程学院,广州510640
出 处:《塑性工程学报》2009年第1期88-94,共7页Journal of Plasticity Engineering
基 金:广东省科技计划资助项目(2007B010400052);汽车车身先进设计制造国家重点实验室开放基金资助项目(30715006)
摘 要:不同材料的板件连接技术对开发钢铝一体化车身结构至关重要。机械连接技术是连接异种金属的新方法,通过试验方法,研究影响机械连接接头剪切强度与剥离强度的因素,这些因素包括冲头尺寸、异种金属板材的放置次序、板材厚度、连接接头直径等,得到了接头最大剪切力与最大剥离力随这些因素变化的规律,这些因素的影响从大到小依次为冲头尺寸、异种金属板材的放置次序、板材厚度、连接接头直径。研究结果为设计出优质的钢与铝机械连接接头提供了依据。It is very important for developing the steel-aluminum hybrid structure car body to study the join technologies between various material plates. Mechanical clinching is a new way used in jointing dissimilar metals in car body. The Tog-L-lot sheet metal joining system is mechanical clinching. This paper investigates some factors such as punch size, joint bottom diameter, sheet thickness, dissimilar sheet sequence on the shearing intension and peeling intension of the joints produced by the Tog-L-loc sheet metal joining system through the orthogonal test method. The degree of influence of the factors has such an order that the punch size, the dissimilar sheets sequence, the sheet thickness, the joint bottom diameter. The research results can provide the criterion for designing the excellent joints between dissimilar metals in the process of developing the steel-aluminum hybrid structure car body.
分 类 号:TG156[金属学及工艺—热处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63