碳纳米管/粉末丁苯橡胶复合材料的热学性能  

Thermal Properties of Carbon Nanotubes/Styrene-Butadiene Rubber Composites

作　　者：周湘文[1,2] 朱跃峰[2] 宋鹏程[3] 刘长洪[3] 熊国平[2] 梁吉[2] 董建令[1] 于溯源[1] 

机构地区：[1]清华大学核能与新能源技术研究院 [2]清华大学机械工程系 [3]清华大学物理系,北京100084

出　　处：《高分子材料科学与工程》2009年第2期62-65,共4页Polymer Materials Science & Engineering

基　　金：国家自然科学基金资助项目(10332020)

摘　　要：将碳纳米管(CNTs)及其它配合剂制成悬浮液,与丁苯胶乳共混,然后利用喷雾干燥法制备CNTs/粉末丁苯橡胶复合材料,检测其热学性能,并进行相应的理论分析。结果表明,随着CNTs加入量的增加,橡胶复合材料的热分解温度逐渐增加,CNTs/橡胶复合材料的热导率逐渐提高,当CNTs体积百分比含量约为22%,即CNTs加入量为60 phr时,与纯胶样品相比,复合材料的热导率提高近1倍。理论分析表明,由于CNTs自身的弯曲和缠绕以及混酸氧化对CNTs自身导热性能的破坏,复合材料热导率的实测值与理论计算值存在一定差距。Carbon nanotubes （CNTs）/styrene-butadiene rubber （SBR） composites were prepared by spray drying method with the suspension of acid-treated CNTs and vulcanizing reagents in SBR latex. Thermal properties of the composites were tested and corresponding theoretical analysis were discussed. Experimental results show that the introduction of CNTs into SBR matrix is benificial to improve thermal stabilities of the composites and thermal decomposition temperatures and thermal conductivities of the composites are gradually enhanced with the augment of CNTs addition. Comparing with that of the pure SBR, when the CNTs content is 22%, that is, 60 phr of CNTs, the thermal conductivity of the composite is improved by nearly 100 %. Powder SBR composites modified with CNTs would be a new type of nanocomposites with excellent comprehensive properties. Theoretical analysis indicates that the measured thermal conductivities of the composites are less than theoretical predictions due to mainly the curvatures and twists of CNTs and the damage of acid treatment which can result in decreasing the thermal conductivity of CNTs.

关 键 词：碳纳米管 丁苯橡胶 喷雾干燥法 热导率 热稳定性 

分 类 号：TB383[一般工业技术—材料科学与工程]