小型甘蔗收割机断尾质量影响因素的试验研究  

Experimental Research on Influence Factor of Cane-end Cutting Quality of Mini-type Sugarcane Harvester

作　　者：林娟[1] 梁式[1] 李尚平[2] 戴小标[1] 江少杰 

机构地区：[1]广西大学、机械工程学院,南宁530004 [2]钦州学院,广西钦州535000 [3]贝卡尔特钢帘线有限公司,山东威海264205

出　　处：《农机化研究》2009年第4期100-103,共4页Journal of Agricultural Mechanization Research

基　　金：国家自然科学基金项目(50365001);广西制造系统与先进制造技术重点实验室科研项目(桂科能07109008_021_K);广西区科技攻关项目(0235008-5)

摘　　要：以研究甘蔗断尾断面质量及切割功耗为目的,采用试验方法,研究了进给速度、刀盘转速、刀盘悬伸长度对断面质量及切割功耗的影响。应用综合评分法处理实验结果,得出较优参数组合,即刀盘转速为900r/min,进给速度为0.488m/s,刀片悬伸为60mm。通过方差分析得知,刀盘转速对试验结果影响高度显著。同时,探讨了3种不同圆盘切割器的断尾效果,得出工具钢刀片的断尾质量最好且功耗最小的结论。In order to study the section quality of cane - end and cutting power consumption, the effect of speed of feed, cutter - disk speed of rotation, cutter - disk overhung length on the section quality and cutting power consumption were discussed with a experimental method. Taken Syntheses method of marks to process the experimental result, arriving at the relatively excellent combination parameter：cutterdisk speed of rotation is 900 r/min, speed of feed is 0. 488m/s, cutter - blade overhung quantity is 60mm. By the analysis of variance, learning that cutter - disk speed of rotation has highly significant influence on test result. At the same time, researching the cutting effect of three different of disk cutter -bar, gotten out the consequence that the dock quality of tool steel cutter - blade might as well, power consumption least.

关 键 词：甘蔗收割机 断尾试验 方差分析 

分 类 号：S225.53[农业科学—农业机械化工程]