填充系数对同步转子密炼机混炼性能的影响  

Effects of the Fill Factors on the Mixing Behaviour of the Mixer with Synchronous Rotors

作　　者：陈国栋[1,2] 汪传生[2] 满敬国 郭德益 

机构地区：[1]哈金森工业橡胶制品苏州有限公司,江苏苏州215122 [2]青岛科技大学机电工程学院,青岛266042 [3]溧阳市振大铁路制品有限公司,江苏溧阳213300 [4]山东安驰轮胎有限公司,山东诸城262233

出　　处：《特种橡胶制品》2009年第1期51-54,共4页Special Purpose Rubber Products

摘　　要：研究了在同步转子密炼机上顶栓压力、冷却水温度和转子转速一定的条件下,改变填充系数对六棱同步转子密炼机混炼性能的影响。结果表明:六棱同步转子有很强的吃胶能力,填充系数(β)存在最佳值。Efects of change of fill factors on rotors were studied at the conditions of fixing speed, The results showed that the mixer with 6 ,and best fill factors. mixing behavious of mixer with 6 wings synchronous the ram force, cooling water temperature and rotor wings synchronous rotors had strong mixing capacity

关 键 词：密炼机 六棱同步转子 填充系数 

分 类 号：TQ330.43[化学工程—橡胶工业]