弧面凸轮高速铣削的试验研究  

Experimental Study on High Speed Milling of Globoidal Cam

作　　者：刘磊[1] 袁光明[1] 王海涛[1] 戚蒿[2] 

机构地区：[1]山东理工大学 [2]西南石油大学

出　　处：《工具技术》2009年第2期33-35,共3页Tool Engineering

摘　　要：在五轴联动加工中心上进行了弧面凸轮的高速铣削试验,研究了切削用量对弧面凸轮轮廓表面粗糙度的影响规律。结果表明:提高切削速度、减小切削深度有利于减小轮廓表面粗糙度值;当每齿进给量f<0.08mm时,其对表面粗糙度的影响不明显。An experiment of high-speed milling globoidal cam was carried out on a 5-axis MC, and the effects of cutting parameters on the contour surface roughness of globoidal cam were investigated. The experimental results show that the contour surface roughness reduced as a higher cutting speed and a less cutting depth, and the feed rate has litter influence on the surface roughness when it is less than 0.08 mm.

关 键 词：弧面凸轮 高速铣削 切削用量 表面粗糙度 正交试验 

分 类 号：TG54[金属学及工艺—金属切削加工及机床] TH132.47[机械工程—机械制造及自动化]