电场激活燃烧合成(TiB2)PNi/Ni3Al/Ni功能梯度材料  

Synthesis of(TiB_2)_PNi/Ni_3Al/Ni gradient material via field-activated combustion

作　　者：孟庆森[1] 辛立军[1] 陈少平[1] Munir Z A 

机构地区：[1]太原理工大学材料科学与工程学院,太原030024 [2]美国加州大学戴维斯分校,California 95616

出　　处：《复合材料学报》2009年第1期80-85,共6页Acta Materiae Compositae Sinica

基　　金：国家自然科学基金项目(50671070);山西省归国留学科学项目(2008-26)

摘　　要：采用电场激活压力辅助合成技术(FAPAS)制备了(TiB2)PNi/(TiB2)PNi3Al/Ni3Al/Ni梯度材料,主要研究电场激活燃烧合成过程中电场对材料合成及层界面扩散连接的作用。分析了梯度材料各层的界面微观组织及相组成和材料的硬度分布。结果表明,采用FAPAS技术结合机械合金化工艺制备的(TiB2)PNi/(TiB2)PNi3Al/Ni3Al/Ni功能梯度材料具有快速、简便和组织均匀密实的特点。梯度材料的陶瓷复合层、Ni3Al层和Ni板的界面区产生成分的互扩散,形成了良好的冶金结合。从Ni板到陶瓷复合层的硬度呈梯度分布。（TiB2）pNi/（TiB2）pNi3Al/Ni3 Al/Ni gradient materials were prepared by mechanical alloying（MA）and field-activated pressure-assisted synthesis （FAPAS）. The effects of the electric field to synthesis and diffusion of layers have been investigated. The microstructure and the phase composition of the interfaces and the microhardness of the gradient materials were characterized. The results show that it is feasible for the four- layered gradient materials samples of （TiB2）p Ni /（TiB2 ）p Ni3 Al/Ni3 Al/Ni to be produced by FAPAS process, and that this method is fast, simple and the product is of uniformity. Concentration profiles of elements across the interfaces of the layers show significant inter-diffusion and good metallurgical bonding. The measured microhardness values of the sample increase smoothly from the side of the nickel substrate to the surface layer.

关 键 词：电场激活 燃烧合成 NI3AL (TiB2)PNi FGMS 

分 类 号：TB331[一般工业技术—材料科学与工程]