循环次数对磨料流加工效果的影响  

Effect of Number of Cycles on Polishing Effect in Abrasive Flow Machining

作　　者：龚胜[1] 宋桂珍[1] 李元宗[1] 

机构地区：[1]太原理工大学机械工程学院,山西太原030024

出　　处：《机械管理开发》2009年第2期82-83,共2页Mechanical Management and Development

摘　　要：主要研究循环次数对磨料流加工效果的影响。研究表明相应加工参数相同的条件下,工件的表面粗糙度值随着循环次数的增加而下降,但随着循环次数的进一步增加,粗糙度值下降的趋势减缓。This paper researches the infiuence of the number of cycles in Abrasive flow maehining（AFM）. The investigation results show that surface roughness decreasingas as the number of cycles increaing which based on the processing parameters fixed ,but with the number of cycles increasing further, the downtrend of surface roughness is slowing-down.

关 键 词：磨料流加工 AFM 循环次数 表面粗糙度 表面形貌 

分 类 号：TG739[金属学及工艺—刀具与模具]