检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张小静[1] 崔英[1] 卢玉灵[1] 李艳欣[1] 杨德育[1] 吴保国[1]
机构地区:[1]中国石化河南油田分公司第一采油厂,河南桐柏474780
出 处:《石油地质与工程》2009年第2期49-52,共4页Petroleum Geology and Engineering
摘 要:双河油田Ⅵ油组综合含水93.4%,采油速度0.58%,多数小层强水淹,通过数值模拟等手段对双河油田Ⅵ油组强水淹层进行了潜力评价,针对剩余油分布特征及生产动态状况;利用注采结构调整、液流转向、去封、解堵打新井及对长期封堵层再利用等手段,恢复可采储量67.5×10^4t,采收率由40.68%提高到42.2%。单元递减下降,采油速度提高,开发趋势好转。Ⅵproducing section in Shuanghe oilfield is characterized by the high composite water cut as 93.4%,the production rate as 0.58%and major member being intensely water -flooded.The recovery potential of the intensely water-flooding layers is evaluated through the numerical simulation. After the measures such as adjustment of injection and recovery framework,fluid diversion,deblocking,broken down and recycling the plugged zone of long duration are used according to the distribution of residual oil and production performance,the recoverable reserves are resumed to be 67.5×10~4 t and the recovery rate is increased from 40.68% to 42.2%.Then the degression of fluid unit is contained and the production rate is enhanced,resulting in a good production condition.
关 键 词:双河油田 Ⅵ油组 强水淹 流动单元 剩余油 挖潜 措施
分 类 号:TE313.3[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.73