多功能热泵空调热水器的模拟与实验分析  

Simulation and experimental study on a multi-function heat pump air-conditioner integrated water heater

作　　者：徐国英[1] 李舒宏[1] 张小松[1] 武文彬[1] 

机构地区：[1]东南大学能源与环境学院,南京210096

出　　处：《哈尔滨工业大学学报》2009年第2期211-213,共3页Journal of Harbin Institute of Technology

基　　金：国家高技术研究发展计划资助项目(2007AA05Z434)

摘　　要：为了降低家庭热水能耗,提高设备利用率,减少初投资,设计了一种兼有空调与热水供给功能的多功能热泵空调热水器.对压缩机额定功率1.3 kW、热水容量60 L的样机进行了热泵制热水模式的性能模拟与实验研究.实验结果显示,在8℃的环境温度下将水加热到50℃,系统能效比为2.2.通过模拟进行系统优化,提出了进一步提高系统整体性能的措施;循环水流量由0.06 L/s增加到0.24 L/s,能效比提高16.8%;冷凝器面积增大一倍,能效比提高16%.A multi-function heat pump device, used for both air conditioning and water heating was developed to decrease the energy consumption of water heating, improve the utilization ratio of equipments and decrease the first cost. A prototype which has a compressor with the rated capacity of 1.3 kW and the water volume of 60 L was designed. Simulation and experiments were carried out in the working mode of heat pump water heating. Results show that the energy efficiency rate （ EERw） of the proto-type is 2. 2 for heating water up to 50℃ in winter when at ambient temperature of 8℃. Measures of further performance improvement are proposed. Optimization results show that, the change of water flow rate from 0. 06 l/s to 0. 24 l/s can increase EERw by 16. 8% ; doubling the heat-transfer area of condenser can increase EERw by 16%.

关 键 词：空调 热泵热水器 多功能 节能 能效比 

分 类 号：TK5[动力工程及工程热物理—热能工程]