检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谷定燮[1] 戴敏[1] 李志军[1] 李振强[1]
出 处:《高电压技术》2009年第3期441-444,共4页High Voltage Engineering
基 金:国家"十一五"科技支撑计划重大项目(2006BAA02A02)~~
摘 要:为给1000kV同塔双回线路提供设计前提依据,通过对我国1000kV同塔双回线路的防雷计算分析和对我国500kV同塔双回线路以及日本1000kV特高压同塔双回线路(降压500kV运行)的故障调查分析,确定我国1000kV同塔双回线路发生双回同时故障跳闸的概率接近于零。根据我国1000kV同塔双回线路的特点,提出了我国1000kV同塔双回线路设计中考虑其潜供电流水平和限制措施、过电压水平和限制措施以及绝缘配合时,均可以不考虑双回同时故障的判断。这一研究为我国1000kV线路设计前提条件的确定提供了技术依据。We analyzed the lightning calculation of 1000 kV double-circuit line in China, the statistical operating experiences of 500 kV double circuit line in China and the UHV double-circuit transmission lines under 550 kV operation in Japan. Results show that the double circuit simultaneous failure trip rate of 1000 kV double-circuit line in China is nearly zero. Therefore, based on the characteristics of 1000 kV double-circuit line in China, double circuit simultaneous failure can be discarded on the research of the level and limitation measures of secondary arc current, the over-voltage level and limitation measures, and insulation coordination. This research provides technical support for the design of 1000 kV double-circuit line on the same tower in China.
关 键 词:1000 KV 同塔双回 线路 故障 跳闸率 故障类型
分 类 号:TM862[电气工程—高电压与绝缘技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63