水下圆柱壳冲击响应分析的有限元模型简化方法  

Method of Simplifying FEM Model of Underwater Cylinder in the Shock Response Analysis

作　　者：孙占忠[1] 胡刚义[1] 张新宇[1] 黄国兵[1] 

机构地区：[1]中国舰船研究设计中心,湖北武汉430064

出　　处：《中国舰船研究》2009年第1期22-28,共7页Chinese Journal of Ship Research

基　　金："十一五"预先研究课题

摘　　要：基于显式非线性动力学分析程序ABAQUS,对水下圆柱壳受到水下爆炸冲击作用下的非线性动态响应进行研究。详细计算不同简化模型受到水下爆炸冲击波作用下的响应并与完整模型的结果进行对比。研究结果表明,用圆柱壳结构的部分模型代替完整模型,可以得到较为满意的计算结果。Based on the explicit finite element code ABAQUS, non-linear dynamic response of an immersed cylinder subjected to underwater explosion was analyzed. The response of different simplified models subjected to underwater explosion and the comparisons with the results of the whole model were comprehensively discussed. The results show that satisfactory simulation can be obtained by establishing a part of the model of the cylinder instead of the whole model.

关 键 词：模型 简化 水下爆炸 冲击响应 

分 类 号：U663.1[交通运输工程—船舶及航道工程]