一种新型宽带光纤拉曼放大器的理论研究  

Theoretical Study of a New-Style Wide-Band Fiber Raman Amplifier

作　　者：陶在红[1] 常建华[1] 武旭华[1] 

机构地区：[1]南京信息工程大学电子与信息工程学院,江苏南京210044

出　　处：《光学与光电技术》2009年第2期22-24,共3页Optics & Optoelectronic Technology

基　　金：南京信息工程大学科研(QD60)资助项目

摘　　要：主要比较分析了光子晶体光纤在设计宽带光纤拉曼放大器上的优越性。简化了多波长宽带光纤拉曼放大器功率耦合方程,分两步来确定各泵浦波的频率及输入功率的大小。首先通过模拟煺火算法迭代出满足条件的泵浦波频率,再利用平均功率分析方法,采用四阶阿当迭代方法计算出各泵浦波输入功率的大小,设计出了具有较宽平坦增益带宽的光纤拉曼放大器。分别对光子晶体光纤和色散位移光纤进行了模拟计算,仿真结果表明光子晶体光纤可以用来设计成短长度、高效的光纤拉曼放大器。The advantage of designing wide-band fiber Raman amplifiers （FRA） based on PCF was compared and analyzed. Power coupled equations for a multi-wavelength broadband Raman amplifier were simplified. The propagation equations were solved with two steps. First, the simulated annealing algorithm was used to obtain required pump frequencies. Then, by making use of average power analysis technique, the 4-step Adam-Bashforth method was adopted to design the FRA with optimal gain-flatness and gain-bandwidth performances. The simulation results of FRA based on PCF and DSF are presented respectively. The results show that PCF is the perfect choice of a small-sized and efficient FRA.

关 键 词：光子晶体光纤 光纤拉曼放大器 有效面积 平坦增益带宽 模拟煺火算法 

分 类 号：TN253[电子电信—物理电子学]