钢带的快速加热工艺研究  

Research of Rapid Heating for Steel Strip

作　　者：郭小龙[1] 黄璞[1] 冯大军[1] 杜光梁[1] 陈圣林[1] 

机构地区：[1]武钢国家硅钢工程技术研究中心,湖北武汉430080

出　　处：《武汉工程职业技术学院学报》2009年第1期1-4,共4页Journal of Wuhan Engineering Institute

摘　　要：采用感应快速加热设备对0.3~0.7mm厚钢带进行了快速加热实验,结果表明升温阶段,钢带平均升温速度可以达到100℃/s以上,达到了快速加热的效果。讨论了感应快速加热方法中钢带出现的饱和温度现象。In this paper, rapid induction heating of O. ment showed the average heating rate during the initial 3-0.7mm steel strip was conducted. The experi- heat stage reached over 100℃/s, a sign of rapid heating. The phenomenon of saturation temperature during induction heating was discussed,too.

关 键 词：钢带 感应快速加热 快速加热 

分 类 号：TG155.2[金属学及工艺—热处理]