方草捆压捆机捡拾器参数设计  

Pickup Parameters Design of Square Baler

作　　者：王振华[1] 王德成[2] 刘贵林[1] 董忠义[1] 翟改霞[1] 

机构地区：[1]中国农业机械化科学研究院呼和浩特分院,呼和浩特010010 [2]中国农业大学工学院,北京100083

出　　处：《农业机械学报》2010年第S1期107-109,共3页Transactions of the Chinese Society for Agricultural Machinery

基　　金："十一五"国家科技支撑计划资助项目(2007BAD35B03)

摘　　要：对方草捆压捆机捡拾器的工作幅宽及滚筒转速进行了设计,并对3组弹齿的捡拾器和4组弹齿的捡拾器的运动参数和漏捡率进行了对比分析。结果表明,3组弹齿捡拾器的漏捡率小于2%,可以避免牧草在地面堆积和漏捡;4组弹齿捡拾器的漏捡率小于1%。The breadth of square baler pickup and roller rotating speed were designed.Simultaneously,contrast analysis on movement parameters of three sets of spring-tooth and four sets of spring tooth and the leakage ratio was carried out in the paper.The results indicated that leakage ratio of three sets of spring-tooth was less than 2% while pasture could avoid being piled up at ground and missed pick-up,and leakage ratio of four sets of spring-tooth was less than 1%.

关 键 词：方草捆压捆机 捡拾器 弹齿 漏捡率 设计 

分 类 号：S817.115[农业科学—畜牧学]