检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:辛志荣[1,2] 邱召明[2] 侯万国[1] 尹立刚[3] 刘晓丽[2] 柳婵[2] 殷敬华[3]
机构地区:[1]山东大学化学与化工学院,胶体与界面教育部重点实验室,济南 [2]烟台大学化学生物理工学院,烟台 [3]中国科学院长春应用化学研究所,高分子物理与化学国家重点实验室,长春130022
出 处:《应用化学》2009年第4期378-382,共5页Chinese Journal of Applied Chemistry
基 金:山东省自然基金(Y2006B32);中国博士后基金(20070411091);山东省博士后创新项目专项基金(200703058)资助项目
摘 要:以聚氧乙烯为起始原料,合成了一系列硬脂酸聚氧乙烯酯及其丙烯酸酯,用FTIR和1H NMR测试技术对其结构进行了表征,用最大气泡法测定了其表面张力.以其作为接枝单体,利用反应挤出接枝方法制备了系列功能化聚乙烯,用FTIR确定了接枝共聚物的结构和接枝率;用DSC、接触角测量仪对接枝共聚物的热性能、结晶行为和表面性质进行了测试分析。结果表明,含有不同分子量(200、600、1 000、2 000和6 000)聚氧乙烯的硬脂酸聚氧乙烯酯的表面张力分别为30.19、32.22、35.30、38.39和43.37 mN/m;相应的聚乙烯接枝共聚物的结晶温度分别为109.30、109.08、110.18、109.74和109.74℃,水接触角分别为81.06°、70.10°、72.25°、76.40°和95.55°。随着聚氧乙烯分子量的增加,表面活性剂的表面活性降低;聚乙烯接枝共聚物的结晶温度高于线形低密度聚乙烯(LLDPE,Tc=104.95℃),且其亲水性得到改善(纯聚乙烯的水接触角103°)。A series of surfactants,a,b,c,d,e and their acrylates,A,B,C,D and E,were synthesized with poly(ethylene oxide)(PEO)(Mw:200,600,1 000,2 000,6 000) and sterate chloride as the main starting materials.Their chemical structures were characterized by means of FTIR and 1H NMR.The surface activity and surface tension(γ) of surfactants a,b,c,d and e were evaluated by maximum bubble pressure method.Surfactants A,B,C,D and E were adopted as the grafting monomers of linear low density poly-ethylene(LLDPE),and grafting reaction was carried out via melt reactive extrusion procedure.Their surface properties were characterized with measuring contact angle.The surface tensions of sterates containing PEO with different molecular mass are individually 30.19,32.22,35.30,38.39 and 43.37 mN/m.The contact angles are individually 81.06°,70.10°,72.25°,76.40° and 95.55°.Thermal properties of grafted copo-lymers were studied by DSC.The crystalline temperatures of grafted copolymers are individually 109.30 ℃,109.08 ℃,110.18 ℃,109.74 ℃ and 109.74 ℃.The surface tension was found to increase with the length of PEO and the hydrophilic property of the grafted copolymers was better than that of pure LLDPE(103°).The crystalline temperatures of grafted copolymers were higher than that of pure LLDPE(104.95 ℃).
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.128.188.69