成型工艺条件对MCMB/石墨复合材料性能的影响  

Effect of Molding Process Conditions upon Performance of MCMB/Graphite Composite

作　　者：朱昱[1] 汪兴兴[1] 倪红军[1] 黄明宇[1] 

机构地区：[1]南通大学机械工程学院,江苏南通226019

出　　处：《南通大学学报（自然科学版）》2009年第1期5-8,共4页Journal of Nantong University(Natural Science Edition)　

基　　金：江苏省自然科学基金重点项目(BK2007704);江苏省"六大人才高峰"项目(06-A-024);江苏省高校自然科学基础研究项目(08KJD430019);南通市应用研究计划项目(K2007001)

摘　　要：为确定MCMB/石墨复合材料双极板模压成型工艺参数,采用w(MCMB)∶w(石墨)=9∶1组成的复合材料制备一组试件并测试其性能.详细分析了不同模压成型压力和烧结温度等工艺参数对MCMB/石墨复合材料的电阻率、抗弯强度和抗压强度的影响,并简要分析了其形成的机理.结果表明:MCMB/石墨复合材料的电阻率和力学性能存在互斥性;MCMB/石墨复合材料双极板模压成型工艺的模压成型压力为3～4 MPa,烧结温度为900℃.To gain the molding process parameters of MCMB/graphite composite bipolar plates,a group of samples being made up of w（MCMB）：w（graphite） = 9∶1 were prepared,and their performance was tested.Effects of different molding presses and sintering temperatures upon MCMB/graphite composite′s resistance rate,bending strength and compressive strength were analyzed respectively.The results show that mutually exclusive factors existed between resistance rate and mechanical properties of MCMB/Graphite composite.And the molding process parameters of MCMB/graphite composite bipolar plates were also obtained,of which molding press was 3~4 MPa and sintering temperature was 900 ℃.

关 键 词：双极板 MCMB 石墨 工艺条件 材料性能 

分 类 号：TM911.4[电气工程—电力电子与电力传动]