杂原子MCM-41分子筛的合成和催化性能  

Synthesis of MCM-41 mesoporous molecular sieves containing heteroatoms and their catalytic activity

作　　者：周华锋[1,2] 杨永进[1] 张劲松[1] 

机构地区：[1]中国科学院金属研究所,沈阳110016 [2]沈阳化工学院应用化学学院,沈阳110142

出　　处：《材料研究学报》2009年第2期199-204,共6页Chinese Journal of Materials Research

摘　　要：采用水热合成法合成了金属原子(Zn,Ni,Fe,Al,Cu,Ce)掺杂的MCM-41介孔分子筛(简称T-MCM-41),并将其应用于邻苯二甲酸二(2-乙基己)酯(DOP)的合成反应,研究了不同原子的掺杂对T-MCM-41的结构、比表面积和孔径、酸性及催化性能的影响.结果表明,所制备的T-MCM-41仍然具有六方有序排列结构,比表面积较高(550-900 m^2/g)、孔径大(3 nm左右),杂原子的引入使T-MCM-41产生了酸中心,从而使其对DOP的合成具有很好的催化活性和选择性.用T-MCM-41(T=Zn,Fe,Al,Cu)催化DOP的合成反应,在5 h的反应时间内苯酐的转化率可以达到95.5%以上,DOP的选择性可达到96.5%以上.T-MCM-41催化剂具有很好的稳定性,Al-MCM-41在重复使用5次后仍具有较好的催化活性.MCM-41 mesoporous molecular sieves containing heteroatoms （Zn, Ni, Fe, Al, Cu, Ce） （T-MCM-41） were synthesized by direct hydrothermal process and were applied in the synthesis of dioctyl phthalate （DOP） in this paper. The effects of different heteroatoms incorporation on structure, specific surface area and pore volume, aciditity and catalytic activity of T-MCM-41 were investigated. The results show that T-MCM-41 which still remains the well-ordered hexagonal mesostructure of MCM-41 has high surface area （550-900 m^2/g）, large pore diameter （-3 nm）. Meanwhile, it has high catalytic activity and selectivity in DOP synthesis because heteroatoms incorporation can produce acid centers. When T-MCM- 41 （T=Zn, Fe, Al, Cu） is used as the catalyst, the conversion of phthalic anhydride （PA） reaches above 95.5% and DOP selectivity reaches above 96.5% in 5 h. Moreover, T-MCM-41 has good stability and Al-MCM-41 holds good catalytic activity after being reused five times.

关 键 词：无机非金属材料 介孔分子筛 MCM-41 邻苯二甲酸二(2-乙基己)酯 

分 类 号：TB321[一般工业技术—材料科学与工程]