Na^＋掺杂量对BaBiO3基陶瓷NTC特性的影响  

Effect of Na^+-doped amount on the NTC characteristics of the BaBiO_3 based ceramics

作　　者：李川[1] 刘心宇[1,2] 石雨[1] 王小军[1] 

机构地区：[1]桂林电子科技大学信息材料科学与工程系,广西桂林541004 [2]中南大学材料科学与工程学院,湖南长沙410083

出　　处：《电子元件与材料》2009年第5期8-10,共3页Electronic Components And Materials

基　　金：广西自然科学基金资助项目(No.桂科字0447092);桂林电子科技大学基金资助项目(No.E20694)

摘　　要：以BaCO3、Bi2O3为原料,Na2C2O4为掺杂剂,用传统固相法制备了具有NTC特性的BaBi1–xNaxO3陶瓷。用XRD,SEM和ρ-t特性测量仪,研究了Na+掺杂量对该陶瓷的物相、显微结构及电性能的影响。结果表明:BaBi1–xNaxO3陶瓷的B25/85值和室温电阻率ρ25均随着x(Na2C2O4)的增加呈现先减小后变大的趋势;当x(Na2C2O4)为0.050时,获得了具有较好NTC特性的试样,其ρ25为2200?·cm,B25/85值为3365K。Using BaCO3, Bi2O3 as raw materials, Na2C2O4 as dopant, the Na^＋-doped BaBi1-xNaxO3 based ceramics with NTC characteristics were prepared by conventional solid-state method. The effects of Na^＋-doped amount on the phase structure, microstructure and electrical properties were investigated by XRD, SEM and ρ-t characteristic tester. The results show that with increase of the Na^＋-doped amount, the P25 and B25/85 value of the ceramic sample first decrease, and then increase again. When x （Na2C2O4）=0.050, the ceramic sample with better NTC characteristics is obtained and its ρ25 is 2 200 Ω. cm and B25/85 value is 3 365 K.

关 键 词：BaBiO3 NTC特性 Na+掺杂量 电性能 

分 类 号：TN371[电子电信—物理电子学]