直弧型板坯连铸机连续弯曲矫直曲线的优化研究  

Optimization of Continuous Bending and Straightening Curve of Vertical-Arc Slab Caster

作　　者：景奉儒[1,2] 李宪奎[1] 杨拉道[3] 孙会国[1] 王铁钢[2] 陈志勇[2] 

机构地区：[1]燕山大学机械工程学院,河北秦皇岛066004 [2]鞍山钢铁集团,辽宁鞍山114021 [3]中国重型机械研究院,陕西西安710032

出　　处：《钢铁》2009年第4期23-27,共5页Iron and Steel

基　　金：河北省自然科学基金资助项目(E2006000235);鞍山钢铁集团资助基金(钢技[06]18-05)

摘　　要：开发了一种新型理想连续弯曲矫直曲线,通过辊列曲线的优化设计完成了对鞍钢二炼钢厂R9 300 mm直弧型板坯连铸机的连续弯曲、矫直改造,做到了铸机水平出坯线标高及外弧基准线均不变,这是传统的连续弯曲矫直曲线所做不到的。同时该辊列曲线还具有使较高温度区域铸坯的应变速率适当大于较低温度区域的应变速率的特点,以便更加充分地利用铸坯高温蠕变和应力松弛的力学特性;该曲线更适合于新铸机的设计。By developing a new ideal continuous bending and straightening curve, the design of a roller curve was optimized to complete bending and straightening part revamping of R9300 mm slab caster in Angang second steel making plant with same pass line and outside are benchmark line. At the same time, with such roller curve in high temperature region, the strain rate is reasonably higher than that in low temperature region for making use of creep and stress relaxation of steel. This curve is suitable for new caster.

关 键 词：连铸机 连续矫直 出坯辊道 标高 机械优化 

分 类 号：TF341.6[冶金工程—冶金机械及自动化]