板坯连铸凝固过程动态耦合数值模拟  

Transient Coupled Numerical Simulation of Solidification Process of Slab Continuous Casting

作　　者：金学伟[1] 王长松[1] 张玉宝[1] 薛建国[1] 裴红星[1] 曹军民[1] 

机构地区：[1]北京科技大学机械工程学院,北京100083

出　　处：《过程工程学报》2009年第2期233-237,共5页The Chinese Journal of Process Engineering

基　　金：内蒙古自治区自然科学基金资助项目(编号:200607010705)

摘　　要：基于实际生产测得的数据,采用连续动态三维耦合模型对板坯连铸凝固过程的流场、温度场和凝固进行模拟.结果表明,由浸入式水口进入的钢液在结晶器内冲击形成上下两股回流,凝固促进了流动速度的衰减,提高拉速扩大了回流区域;结晶器内铸坯宽面偏角部100～150mm处存在局部过热,在结晶器出口,拉速由0.02m/s增加到0.025m/s,坯壳厚度减小约3mm.Based on the data obtained from actual solidification process of slab casting, a 3-D coupled model for describing flow field, temperature field and solidification of slab casting process was simulated with the continuum transient model. The results showed that the fluid flowed from the outlet of submerged entrance nozzle forming top and down recirculations in the mold zone, solidification promoted the decay of turbulent fluid flow speed and the region of recirculation was enlarged along with the casting speed increasing. Local overheat was found at the position of 100-150 mm from the comer of slab in the mold wide zone. About 3 mm decrease in the thickness of solidified shell was calculated by increasing the speed from 0.02 m/s to 0.025 m/s at the mold outlet.

关 键 词：板坯连铸 紊流 温度场 凝固 三维耦合模型 

分 类 号：TF777.1[冶金工程—钢铁冶金] TP391.9[自动化与计算机技术—计算机应用技术]