汽车副仪表板装饰盖注塑模设计  

DESIGN OF INJECTION MOULD FOR DECORATION LID OF AUTOMOBILE VICE-INSTRUMENT BOARD

作　　者：黎秋萍[1] 赵明娟[1] 李德英[1] 张尚兵 

机构地区：[1]华东交通大学载运工具与装备省部共建教育部重点实验室,南昌330013 [2]辽阳金兴汽车内饰集团公司,辽阳111000

出　　处：《工程塑料应用》2009年第5期68-70,共3页Engineering Plastics Application

基　　金：载运工具与装备省部共建教育部重点实验室开放基金资助项目(01307148、01306016)

摘　　要：对汽车内饰件副仪表板装饰盖注塑模进行了设计,运用Pro/E软件实现分型面的设计,使用Moldflow对模具进行了CAE分析,优化了浇口位置,创新了模具设计方式。根据产品结构,应用斜顶机构实现了产品四向侧抽芯,简化了模具结构,降低了制造成本。The injection mould for decoration lid of vice-instrument board in the automobile inner was designed. Based on Pro/E software, the parting surface and the three dimensional injection mould was achieved. The optimum gate location was attained according to the Moldflow analysis, which innovated the way of designing injection mould. In order to achieve the four-direction pulling core, the special tilt mandril was designed according to the product structure, which simplized the injection mould structure.

关 键 词：汽车副仪表板装饰盖 CAD/CAE 斜顶 浇口位置 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业] U463.839.2[机械工程—车辆工程]