C60型梳棉机设计思想的探讨  

Discussion of C60 Carding Machine Design Ideas

作　　者：孙鹏子[1] 张长青 曹继鹏[1] 

机构地区：[1]辽宁省辽东学院 [2]郑州朝歌纺纱有限公司

出　　处：《棉纺织技术》2009年第5期16-20,共5页Cotton Textile Technology

摘　　要：探讨C60型梳棉机设计思想。从加宽机幅、采用较小的锡林直径、刺辊模块化的设计、活动盖板根数的选择、棉网清洁器的选用及针布配置等方面分析探讨了C60型梳棉机的设计思想,认为其提高产量的关键是加宽机幅和采用较小锡林直径。加宽机幅可以直接使产量提高且不影响质量。较小锡林直径可使排杂能力加强,减少锡林因高速等引起滚筒膨胀,在踵趾差不变条件下,可使锡林与活动盖板的小隔距区间变长,使锡林与活动盖板间分梳效能大大加强。Design ideas of C60 carding machine were discussed from aspects of adding machine width,adopting small cylinder diameter and licker-in modularization design,selecting moveable flats numbers,selecting web cleaner and card clothing. It is considered that the key of increasing output is to add machine width and reduce cylinder diameter. Output could be increased directly by adding machine width,but quality could not be effected. Impurity exhausting ability could be enhanced and cylinder expansion caused by higher cylinder speed could be reduced by adopting small cylinder diameter. In condition of same heel-toe difference, length of small gauge area between cylinder and active flat could be increased and carding efficiency between cylinder and active flat could be improved.

关 键 词：C60型梳棉机 机幅 锡林直径 刺辊 棉网清洁器 活动盖板 针布 

分 类 号：TS112[轻工技术与工程—纺织材料与纺织品设计]