基于WinCE5.0的数控系统设计  

The Design of NC System Based on WinCE5.0

作　　者：乔伟[1] 王典洪[1] 王琳[1] 

机构地区：[1]中国地质大学(武汉)研究生院,湖北武汉430074

出　　处：《机床与液压》2009年第5期99-101,共3页Machine Tool & Hydraulics

基　　金：武汉市科技攻关项目(20061009134-06);湖北省科技攻关项目(2007AA101C19)

摘　　要：设计了一种基于WinCE5.0的数控系统,详细阐述了数控系统的软硬件结构与组成。该数控系统硬件部分使用ARM S3C2410处理器作为主控制单元,运动控制器MCX314主要负责接收加工程序命令和插补工作;软件部分根据数控系统的需求,开发出WinCE5.0操作系统下MCX314的设备驱动程序,并实现了操作过程中的人机交互界面。实践证明开发出的数控系统稳定可靠。A NC system was designed based on WinCES. 0, and its hardware and software platform was presented. The NC system uses ARM S3C2410 processor as the main control unit, and the motion controller MCX314 is mainly responsible for receiving processing order and interpolation. The MCX314 device drivers was developed for NC system under the WinCE5. 0 operating system, and the man-machine interface in the course of the operation was realized. Practice proves that the NC system is stable and reliable.

关 键 词：WINCE5.0 MCX314 数控系统 

分 类 号：TP316.2[自动化与计算机技术—计算机软件与理论] TP368.1[自动化与计算机技术—计算机科学与技术]