煤焦油与废塑料共处理油化工艺的研究  

Oil-making Process through Coprocessing of Low-temperature Tar and Waste PE

作　　者：赵金安[1,2] 郭存悦[1,2] 王志忠 

机构地区：[1]华北工学院专科学校 [2]太原工业大学

出　　处：《煤化工》1998年第1期42-44,共3页Coal Chemical Industry

摘　　要：本文对大同直立炉低温煤焦油和废旧聚乙烯塑料共处理油化的工艺进行了研究，通过优化实验，得到了油化工艺的最佳操作条件，并对试验结果进行了分析。结果表明，在最佳工艺条件下，转化率可达８５％，煤焦油加入量为１５％。产品中柴油的十六烷值可达４８，汽油的辛烷值可达９３。In this paper,the process of oil-making through coprocessing of low-temperature tar which comes from Datong standing furnace,and waste PE was studied.The optimum conditions were obtained through optimization experiments.At the same time,the quality of the product was evaluated. Product analysis showed that its conversion rate can reach 85%, the ratio of lowtemperature tar was 15%,hexadecyl number of obtained diesel was 48,octane value of obtained gasoline can reach 93.

关 键 词：煤焦油 共处理 催化裂解 废塑料 油化 燃料油 

分 类 号：TE626.2[石油与天然气工程—油气加工工程]