主动锁模光纤激光器的锁相稳定方法  

Method of Phase-Locked Stability Based on Active Mode-Locked Fiber Laser

作　　者：董姝敏[1,2] 李尧[3] 乔双[4] 

机构地区：[1]吉林师范大学信息技术学院,吉林四平136000 [2]哈尔滨工程大学水声工程学院,哈尔滨150001 [3]北华大学理学院物理系,吉林吉林132013 [4]东北师范大学物理学院,长春130024

出　　处：《半导体技术》2009年第5期427-431,共5页Semiconductor Technology

基　　金：国家863高技术发展计划项目(2002AA632080);吉林省自然科学基金资助项目(20050705-6)

摘　　要：对主动锁模光纤激光器的锁相环路进行了改进,提出一种通过使用"变带宽锁相环"来改善主动锁模光纤激光器稳定性的方法。该方法主要依据信号误差电压实时控制环路的带宽,使环路带宽随锁定信号的频率差动态改变,以达到快速锁定信号的目的,从而提高锁模光纤激光器输出光脉冲的频率稳定性。利用Matlab软件的Simulink功能模块对其实效性进行了仿真验证。结果表明,采用该方法,锁相环的捕捉性能和跟踪性能提高了,主动锁模光纤激光器的工作稳定性得到进一步改善。Phase-locked circuit in active mode-locked fiber laser was improved. A method was proposed to improve the stability of the mode-locked fiber laser by ＂transformable bandwidth phase-locked loop＂. With this method, loop circuit bandwidth can be real-time controlled by signal error voltage, urging bandwidth to change dynamically following margin between input and output frequency, making signal be locked quickly. Frequency stability of output optical impulse was improved thereby. And the practicality are simulated and verified with Simulink function module of Matlab software. The results show that the improved method can enhance capture and synchronize the performance of phase-locked-loop, and increase work stability of mode-locked fiber laser.

关 键 词：主动锁模光纤激光器 变带宽锁相环 跨导滤波器 稳定性 锁相技术 

分 类 号：TN253[电子电信—物理电子学] TN248