三塘湖油田头屯河组流动单元划分及微观渗流特征  

Flow unit classification and microscopic percolation feature of Toutunhe Formation reservoir in Santanghu Oilfield

作　　者：杨希濮[1] 孙卫[1] 解伟 时鹏利[1] 

机构地区：[1]西北大学大陆动力学国家重点实验室,陕西西安710069 [2]陕西延长石油集团研究院,陕西西安710075

出　　处：《断块油气田》2009年第3期1-4,共4页Fault-Block Oil & Gas Field

基　　金：国家重大基础研究发展规划973项目“多种能源矿产共存成藏(矿)机理与富集分布规律”(2003CB214600)资助

摘　　要：为了指导三塘湖油田头屯河组储层的开发,针对储层特征,选择渗透率、压实校正后的孔隙度及孔喉半径R353个参数进行聚类、判别分析,将头屯河组划分为4类流动单元,各流动单元与沉积微相具有很好的对应关系。水驱油实验中,A类流动单元,水呈活塞式推进,驱油效率高;B类呈树枝状推进,驱油效率中等;C、D类呈指状推进,驱油效率低。微观孔隙结构的差异是造成驱油效率差别的主要原因。C、D类流动单元在研究区分布面积广,残余油多,是剩余油富集区。To guide the development of Toutunhe Formation reservoir in Santanghu Oilfield, some parameters as permeability, porosity by compaction and pore throat radius R35 are clustered and analyzed aimed at the reservoir characteristics. The Toutunhe Formation reservoir is divided into four kinds of flow units. The result shows that there is a good responding relationship between each flow unit and sedimentary mierofacies. Through the oil displacement experiment by water, we can see that Type A flow unit is putting on at piston with high oil displacement efficiency. Type B flow unit is putting on at arborization with medium oil displacement efficiency and Type C and Type D are putting on at finger with low oil displacement efficiency. The differences of microscopic pore structure are the main reasons that cause the flow units displacement efficiency differences. Type C and Type D flow units are widespread in study area with the rich residual oils. They are the regions that are rich in remaining oil.

关 键 词：流动单元 渗流特征 微观孔隙结构 头屯河组 三塘湖油田 

分 类 号：TE34[石油与天然气工程—油气田开发工程]