E65型精梳机喂棉工艺研究  

Feed Processing Research of E65 Comber

作　　者：任家智[1] 杨玉广[1] 贾国欣[2] 马宏庆 

机构地区：[1]中原工学院 [2]河南工程学院 [3]立达纺织仪器有限公司

出　　处：《棉纺织技术》2009年第6期14-16,共3页Cotton Textile Technology

摘　　要：分析精梳机喂棉长度、小卷定量对梳理效果、精梳落棉率及分离接合质量的影响。在E65型精梳机上采用不同的给棉长度及小卷定量,进行了CJ14.6tex纺纱工艺参数对比试验,测试了精梳落棉率、精梳台时产量、成纱条干、成纱千米细节、成纱千米粗节、成纱千米棉结。结果表明:在新型高效精梳机上,采用较小的喂棉长度及较大的小卷定量,可提高精梳机的梳理效果、改善成纱质量。Effect of feed length and weight per unit of lap on combing effect, comber noil rate and quality of detaching and binding were analysed. Processing parameter of CJ 14.6 rex yarn were contrasted on E65 comber by adopting different feed length and weight per unit of lap. Comber noil rate, output of comber, finish yarn evenness, thin places of per kilometer yarn, thick places of per kilometer yarn and neps of per kilometer yarn were tested. The result shows that in new efficient comber, combing effect and yarn quality could be improved by adopting less feed length and larger weight per unit of lap.

关 键 词：喂棉长度 小卷定量 梳理效果 精梳落棉率 分离接合 条干 常发性纱疵 

分 类 号：TS103.225[轻工技术与工程—纺织工程]