细号高密弹力贡缎织物的生产体会  

Production Experience of Fine and High Density Elastic Satin Drill Fabric

作　　者：李秋香 陈红娟 张怡 龚建明 

机构地区：[1]西北二棉集团有限公司

出　　处：《棉纺织技术》2009年第6期56-58,共3页Cotton Textile Technology

摘　　要：为了提高CJ7.29/9.72(33dtex)905.5/511.5170弹力贡缎织物的织机效率,着重从改变浆纱工艺路线、优选浆料配方、加宽布边及改造停经架等几个方面进行探讨。经过实践证明:细号高密品种选用先浆纱后并轴的上浆工艺路线,浆纱工序采用"高浓、低黏、重渗透、求被覆"的工艺原则,织造工序采用"早开口、低后梁、大开口量"的工艺原则,可有效解决生产中的技术难题,保证正常织造。织机效率达到77.5%,好轴率达到89.9%。To increase loom efficiency of CJ 7.29/9.72 （33 dtex）905.5/511.5 170 elastic satin drill fabric, several aspects were discussed including modifying sizing processing route, optimizing size mixture formula, widening selvage and changing warp stop frame et al. After practice it proves that processing route of sizing first re-beaming second should be adopted to fine and high density product ,processing principle of higher concentrate ,lower viscosity ,emphasizing permeating should be used in sizing process, earlier shedding, lower back beam and larger shedding should be applied in weaving process, finally technology problems could be resolved and weaving could be ensured, loom efficiency could reach 77.5% and accepted beam rate could reach 89.9%.

关 键 词：细号高密 弹力贡缎织物 浆纱 并轴 经位置线 停经架 布边 

分 类 号：TS106.53[轻工技术与工程—纺织工程]